Panasonic KX-TVS100 Quick Installation Manual page 52

Type------------------------------
Name-----------------------------
Tenant---------------------------
Incoming/Outgoing ----------
Incoming Mode (Day) --
Incoming Mode (Night) -----
Intercept Routing (Day)------
Intercept Routing (Night)----
Toll Restriction Level -------
Toll Restriction Table -------
Dialing Plan -------------------
CO-CO Duration Limit -------
Disconnect Time --------------
Pause Time ---------------------
Hook Switch Flash Time ----
4. Set the Intercept Routing Time-Out (System) parameter in the System - System
This parameter tells the KX-T336 how long to let a call ring at
forwarding. The KX-T336 ringing patterns are five seconds long.
To Delay Intercept Routing by
3 rings
4 rings
5 rings
6 rings
System - System Timer
--------------------------------------------------------+-----+-----+-----+-----
Held Call Reminder -----------------------------------
Held Call Reminder (ATT) ---------------------------
Transfer Recall -----------------------------------------
Pickup Dial Waiting ----------------------------------
External First Digit Time-Out -----------------------
External Interdigit Time-Out ------------------------
External Interdigit Time-Out (PBX)----------------
Toll Restriction Guard Time-Out -------------------
Call Forwarding - No-Answer Time-Out -----------
Intercept Routing Time-Out (System) -
Intercept Routing Time-Out (DISA) ----------------
Attendant Overflow Time-----------------------------
SMDR Duration Time --------------------------------
-
5. Set the Follow-on ID sequence for the direct termination extension. Setting is
you choose to have the Intercept Routing feature handle calls
extension. (See Step 4 on page 4.11 for
DDD
CD
—
Both-way
DIL 1:1
FLEXIBLE
EXT:112 (Type:No.)
EXT:112 (Type:No.)
16
1
Type-A
10 minute(s) (1-64)
1.5 second(s)
3.5 second(s)
None
Recommended Settings
Use this setting
15 seconds
20 seconds
25 seconds
30 seconds
| ONL | PRG | SCR | DIR
240 second(s) (15-240)
240 second(s) (15-240)
240 second(s) (15-240)
1 second(s) ( 1- 5)
20 second(s) ( 5-120)
5 second(s) ( 3- 15)
5 second(s) ( 3- 10)
5 second(s) ( 0- 25)
19 second(s) ( 5- 60)
15 second(s) (15-240)
15 second(s) (15-240)
15 second(s) (15-240)
3 second(s) ( 0- 15)
Follow-on ID sequence programming instructions.)
← ← ← ← ← ← ← ← ← ← ← ←
← ← ← ← ← ←
← ← ← ← ← ←
an extension before automatically
← ← ← ← ← ← ← ← ← ← ← ←
forwarded from the operator's
Timer screen.
based on how
6.52