The VPS can be installed on the floor or on the wall. If mounting on the wall, be sure that the wall can support
the weight of the VPS. Use the screws supplied with the system or use screws that are the same in diameter.
O
W
N
OOD
1. Place the template (included) on the wall to mark the three screw positions.
Template
2. Install three screws.
Drive the screw to
this position.
3. Hook the unit onto the screw heads.
O
C
M
N
ONCRETE OR
1. Place the template (included) on the wall to mark the three screw positions.
ORTAR
6.15