Common Digital Integration Features And Setup Procedures; Live Call Screening (Lcs) Programming; Live Call Screening Recording Mode Assignment; Live Call Screening Private/Hands-Free Mode Assignment - Panasonic KX-TVS100 Quick Installation Manual

COMMON DIGITAL INTEGRATION FEATURES AND SETUP PROCEDURES

L C S
IVE ALL CREENING
LCS notifies subscribers of incoming messages to their mailboxes. The notification method is programmable
for hands-free or private. Hands-free allows the user to monitor a recording through the speaker-phone and, if
desired, intercept the call by lifting the handset. The private mode notifies the user with an alert tone when a
message is being recorded. By pressing the LCS button, the user can monitor the message and intercept the call
by going off-hook. Programming also determines whether the mailbox continues to record after the user
intercepts the call.
L C S
IVE ALL CREENING
This program allows the VPS to continue recording the conversation in the mailbox after the extension
intercepts the call during the Live Call Screening.
1. Enter [610].
2. Press the NEXT button (sp-phone).
Screen Output: Jack No.?
3. Enter the jack number.
Screen Output: # _ _ Stop Recording
(_ _ = the jack number you entered)
4. Press the SELECT button (Auto-Ans) until the desired selection is
5. Press STORE.
6. Press the NEXT button (Sp-Phone).
7. Repeat Steps 4, 5, and 6 until all jacks are programmed.
Conditions: Only available with D-PITS Integration.
L C S
IVE ALL CREENING
This program assigns a VPS response for when a message is being left in a mailbox. It determines whether an
alert tone is sent and whether the recorded message is played through the built-in speaker of the extension. The
default mode is hands-free. (This is a station level program and should be done at each individual phone.)
1. Enter PITS programming:
a. With the phone on-hook, press the PROGRAM button.
b. Dial [99]. (Display changes to PT-Prg Mode.)
2. Dial the code for the mode you want this phone to have.
Hands-Free = 71
Private = 72
Screen Output: Hands-Free or Private
3. Press STORE.
4. Exit the program mode by pressing the PROGRAM button.
5. Repeat these steps at each telephone.
Conditions: None.
(LCS) P
ROGRAMMING
R M A
ECORDING ODE
P /H -F
RIVATE ANDS REE
SSIGNMENT
M A
ODE SSIGNMENT
displayed.
6.26