Panasonic KX-TVS100 Quick Installation Manual page 61

7. Date and time setting
8. Activating the Quick Setup
Depending on your PBX type, some steps can be skipped as shown below.
PBX Type
KX-T308/T616
KX-T123211D/T96/T336
non-Panasonic system
KX-TD816/1232
Starting the Quick Setup
Quick Setup is only available to the VT100 mode. At the System Administration Top Menu, type [5] and
press ENTER.
Screen Output:
System Administration Top Menu→5
Quick Setup Utility for connection to Panasonic KX-T series telephone systems.
This utility provides a quick way of programming the Voice Processing System to
operate in a standard automated attendant or Voice Mail configuration when
connected to a Panasonic KX-T series telephone system. The system will prompt
you to enter, modify, or confirm settings based upon which PBX type you select.
By entering the appropriate information in the following screens, the system sets
PBX integration parameters, identifies the extension numbers connected to it,
creates default mailboxes, sets its ports to handle callers with automated attendant
or voice mail service, sets system passwords and sets the time and date. Finally, it
confirms that you want to activate the system based on the information you
entered, modified, or confirmed.
To proceed, press Enter. To exit and cancel Quick Setup now, press [/].
Step 1. PBX Type:
1. Press ENTER.
Screen Output:
Quick Setup - PBX type
Please select your PBX type.
2. Select your PBX type. The required steps are different for some models.
Go to the step indicated below for that type.
Required Procedures
1 2
1
1
1. KX-T308
2. KX-T616
3. KX-T123211D
4. KX-T96
5. KX-T336
6. KX-TD816
7. KX-TD1232
8. OTHERS
3 4 5 6 7
3 4 5 6 7
4 5 6 7
8
8
8
6.61