Chapter 2 Installation; Safety Precautions; Installation; Wiring - Panasonic KX-TVS100 Quick Installation Manual

SAFETY PRECAUTIONS

Please read the following precautions before installing the VPS.
I
NSTALLATION
The VPS can be installed on the floor or on the wall. Improper placement of the system may result in
malfunction, noise, or discoloration. Avoid installing the VPS in the following places:
• in direct sunlight; in hot, cold, or humid places.
• in new areas where there are thermal springs, etc. (where sulfuric gas may
damage the equipment or contacts).
• where shocks or vibrations are frequent or strong.
• in dusty places or places where water or oil may come in contact with the unit.
• near high frequency generating devices such as sewing machines, elevators or
• on or near computers, telexes, or other office equipment; near microwave ovens or
conditioners. (Ideally, the VPS should not be in the room with these items and
feet away from televisions.)
Do not obstruct the areas around the PBX and the VPS. Both require space above for cooling and space
on the sides for maintenance and inspection.
W
IRING
• Do not wire the telephone cable parallel to an AC power source, computer, telex, etc. If cables are run
near those wires, shield the cables with metal tubing or use
• Use protectors if running cables on the floor; avoid wiring under carpets.
• Avoid sharing a 120 V AC power supply for computers, telexes, and other office equipment with the
VPS. Induction noise from that equipment may interrupt the VPS operation.
When making any connections or removing the cover, be sure the power switch is turned off.

WALL MOUNTING

CHAPTER 2
I
NSTALLATION
shielded cables and ground the shields.
electric welders.
air
should be at least 6
6.14