Panasonic KX-TVS100 Quick Installation Manual page 48

Held Call Reminder -------------------------------------
Held Call Reminder (ATT) -----------------------------
Transfer Recall ------------------------------------------
Pickup Dial Waiting -----------------------------------
External First Digit Time-Out ------------------------
External Interdigit Time-Out --------------------------
External Interdigit Time-Out (PBX)------------------
Toll Restriction Guard Time-Out ---------------------
Call Forwarding - No-Answer Time-Out -------------
Intercept Routing Time-Out (System) ---
Intercept Routing Time-Out (DISA) --------
Attendant Overflow Time--------------------
SMDR Duration Time -----------------------
5. Set the Follow-on ID sequence for the operator's extension. Setting is based on
have the Intercept Routing feature handle calls forwarded from
page 4.11 for Follow-on ID sequence
Options
Forward to Automated Attendant service
Forward to Voice Mail service
Leave a message in the operator's mailbox
C. If the KX-TVS100 is only answering calls not answered by user extensions:
1. Set the Incoming Mode (Day) for each trunk group to DIL1:1. These parameters
Trunk Group screen.
Group - Trunk Group
--------------------------------------------------------+-----+-----+-----+-----
Trunk Group No. = 01 (1/2)
Type------------------------------
Name-----------------------------
Tenant--------------------------
Incoming/Outgoing ----------
Incoming Mode (Day) --
Incoming Mode (Night) -----
Intercept Routing (Day)------
Intercept Routing (Night)----
Toll Restriction Level -------
Toll Restriction Table -------
Dialing Plan -------------------
CO-CO Duration Limit -------
Disconnect Time --------------
Pause Time ---------------------
Hook Switch Flash Time ----
240 second(s) (15-240)
240 second(s) (15-240)
240 second(s) (15-240)
1 second(s) ( 1- 5)
20 second(s) ( 5-120)
5 second(s) ( 3- 15)
5 second(s) ( 3- 10)
5 second(s) ( 0- 25)
19 second(s) ( 5- 60)
15 second(s) (15-240)
15 second(s) (15-240)
15 second(s) (15-240)
3 second(s) ( 0- 15)
programming instructions.)
FOLLOW-ON ID OPTIONS
Operator's Sequence Setting
#8
#6
#6 followed by the operator's extension
number
| ONL | PRG | SCR | SEL
DDD
CD
—
Both-way
DIL 1:1
FLEXIBLE
EXT:104 (Type:No.)
EXT:104 (Type:No.)
16
1
Type-A
10 minute(s) (1-64)
1.5 second(s)
3.5 second(s)
None
← ← ← ← ← ←
← ← ← ← ← ←
the operator's extension. (See Step 4 on
← ← ← ← ← ← ← ← ← ← ← ←
how you choose to
are in the Group -
6.48