Preprinted Paper; Setting The Paper Size And Type - Samsung PROXPRESS M332 SERIES User Manual

Media and tray

Preprinted paper

When loading preprinted paper, the printed side should be facing up with an
uncurled edge at the front. If you experience problems with paper feeding, turn
the paper around. Note that print quality is not guaranteed.
• Must be printed with heat-resistant ink that will not melt, vaporize, or
release hazardous emissions when subjected to the machine's fusing
temperature for 0.1 second (about 170°C (338°F)).
• Preprinted paper ink must be non-flammable and should not adversely
affect machine rollers.
• Before you load preprinted paper, verify that the ink on the paper is dry.
During the fusing process, wet ink can come off preprinted paper, reducing
print quality.
Glossy Photo
• Recommended media: Glossy paper (Letter) for this machine by HP
Brochure Paper (Product: Q6611A) only.
• Recommended media: Glossy paper (A4) for this machine by HP Superior
Paper 160 glossy (Product: Q6616A).
5

Setting the paper size and type

After loading paper in the paper tray, set the paper size and type using the
control panel buttons.
• You can set the machine's settings by using the
- For Windows and Mac users, you set from Samsung Easy Printer
Manager (Switch to advanced mode)
see "Device Settings" on page 239.
• It may be necessary to press
some models.
1 Select (Menu) button on the control panel.
2 Press Paper and select the tray you want.
3 Press Paper Size or Paper Type.
Device Settings in
program.
Device Settings,
OK to navigate to lower-level menus for
2. Menu Overview and Basic Setup
45