Fujitsu Primergy BX620 S4 User Manual page 80

Chapter 4 Manual OS Installation
11
Click [Finish].
12
Click [Close] to exit the properties window.
13
Eject the PRIMERGY Startup Disc and restart the Server Blade.
●
For 1Gbit/s Ethernet I/O Module (PG-LND201)
1
Insert the PRIMERGY Startup Disc.
2
The following EXE is executed.
\DRIVERS\LAN\Broadcom\Ext\W2K3x64\DrvInst\setup.exe
3
Click [Next].
Drivers installation starts.
4
Click [Finish].
5
Eject the PRIMERGY Startup Disc and restart the Server Blade.
■ For Windows Server 2003
●
For Onboard LAN
1
Insert the PRIMERGY Startup Disc.
2
The following EXE is executed.
\DRIVERS\LAN\Broadcom\Onboard\DrvInst\IA32\setup.exe
3
Click [Next].
Drivers installation starts.
4
Click [Finish].
5
Eject the PRIMERGY Startup Disc and restart the Server Blade.
●
For Eth. Ctrl 2x1Gbit PCI-E 1000-BASE-T lp (PG-2861L)
The LAN driver installation procedure differs depending on whether the network adapter was
recognized during the OS installation.
1
Insert the PRIMERGY Startup Disc into the server.
2
Click [Start] – [Administrative Tools] – [Computer Management].
3
Click [Device Manager].
80