Vlan - Fujitsu Primergy BX620 S4 User Manual

11
Restart the Server Blade.
When a 1 Gbit/s Ethernet I/O Module composing a team is replaced, if the card before replacement is
set to the primary level, the MAC address that was assigned to the card before replacement is
inherited by the replaced card. Therefore, if the replaced card is used in the same segment, the MAC
address will be duplicated. To replace the LAN card used in the team, you need to re-set the LAN
driver in the steps as above.
When installing a daughter card to replace in a different daughter card slot from that of the previous
card, you need to delete and re-install the driver.

5.7.4 VLAN

A Virtual LAN (VLAN) is a collection of devices to connect to LAN, which are grouped in logical mode
not physically. VLAN can specify a network segment that is available to a device. This enhances
network performance and security.
A VLAN has a function that logically groups users and devices, simplifying a network management
between buildings.
A VLAN is usually controlled by switch setting. A device can belong to only one VLAN for each LAN
card. This driver enables you to configure multiple VLANs on one LAN card. This driver also supports
the VLAN defined in IEEE802.1Q.
Switch
(IEEE802.1Q support)
VLAN10 VLAN20
Client
Client Client
■ Notes
For more details, refer to [Help] in Intel
• A VLAN is available only for Windows Server 2003.
• When adding or deleting a VLAN on Windows Server 2003, make sure to use Intel
In Windows Server 2003, do not delete or add the VLAN from [Device Manager], [Network and
Dial-up Connections], or [Network Connection]. Not using Intel
adding or deleting a VLAN properly. To add a VLAN again after a VLAN has been deleted, add it
after the system has been rebooted.
• On a VLAN do not use protocols other than IP.
Installing the LLC and LNDFC protocols using the Fujitsu communication control service will cause
them to be bound (connected) unconditionally with the VLAN. In a system where protocols other
than IP are installed with a VLAN, release the bind between the protocols and the VLAN.
VLAN10,20,30
VLAN30
Client Client
Client
®
PROSet.
PRIMERGY BX620 S4 Server Blade User's Guide
PRIMERGY Server
LAN card
®
PROSet will prevent you from
1
2
3
4
6
7
8
®
PROSet.
9
123