Bios Setting With Expansion Card Installed - Fujitsu Primergy BX620 S4 User Manual

Chapter 7 Installing Internal Options
7.8 BIOS Setting with Expansion
Card Installed
In this Server Blade, you need to change the settings of the BIOS Setup Utility
according to installation conditions when installing the 4Gbit/s FC I/O Module (PG-
FCD201), 2Gbit/s FC I/O Module (PG-FCD102), 1Gbit/s Ethernet I/O Module (PG-
LND201), Eth. Ctrl 2 x 1Gbit PCI-E 1000-BASE-T lp (PG-2861L) of an expansion
card slot module, or SCSI Ctrl U160 lp (PG-1301L).
For a device that starts the OS, use the BIOS Setup Utility to set the optional ROM (OPROM) to
[Enabled].
For more details on the setting procedures, refer to "8.2.5 PCI Configuration Submenu" ( p.176) in the
[Advanced] menu.
Refer to the "PRIMERGY BX620 S2 Server Blade User's Guide" or "PRIMERGY BX620 S3 Server
Blade User's Guide" when performing 2Gbit/s FC I/O Module (PG-FCD102) settings.
164