Fujitsu Primergy BX620 S4 User Manual page 78

Chapter 4 Manual OS Installation
2
Insert the PRIMERGY Startup Disc.
3
Double-click the icon of the LAN device.
The properties are displayed.
4
Click the [Driver] tab and click [Updating Driver].
The [Hardware Update Wizard] window appears.
5
Select [Install from the list or specified location] and click [Next].
6
Select [Not searching and select installing driver] and click [Next].
7
Click [Use Disk].
8
Specify the following folder name in the "Copies files from manufacture's file",
and click [OK].
For Onboard LAN
\DRIVERS\LAN\Broadcom\Onboard\NetXtreme\Windows2003\Driver
For 1Gbit/s Ethernet I/O Module
\DRIVERS\LAN\Broadcom\Ext\W2K3\l4nd_w2k3
For Eth. Ctrl 2x1Gbit PCI-E 1000-BASE-T lp (PG-2861L)
\DRIVERS\LAN\Intel\Pro1000\Win32
9
Click [Next].
The driver will be installed.
10
Click [Finish].
11
Click [Close].
12
Eject the PRIMERGY Startup Disc and reboot the Server Blade.
Do not specify a lower value in [Receiving descriptor] for the properties of the LAN adapter.
78
When AFT is already created, the virtual adapter below exists. Do not select it.
•Intel(R) Advanced Network Service Virtual Adapter