Fujitsu Primergy BX620 S4 User Manual page 156

Chapter 7 Installing Internal Options
7
Install the expansion card slot module in the Server Blade.
Insert the expansion card slot module to the back of the slot and close the cover to make sure that
it is fully inserted in the connector for the expansion card slot module.
Expansion card slot
module connector
Cover
8
Secure the expansion card slot module.
Secure the module using the screw removed in Step 5.
9
Attach the top cover.
"7.2 Removing and Attaching the Top Cover" (p.138)
10
Install the Server Blade to the Chassis.
→ "4.2 Installing Server Blades" in "BX600 S3 Blade Server System Unit Hardware Guide"
11
Turn on the Server Blade and check the BIOS Setup Utility settings.
Referring to "7.8 BIOS Setting with Expansion Card Installed" ( p.164), confirm whether the
setting satisfies card installation conditions. If the setting does not satisfy those installation
conditions, change the setting.
■ How to remove an expansion card slot module
To remove the expansion card slot module, simply reverse the installation procedures.
156
Screw