Installing The Lan Driver - Fujitsu Primergy BX620 S4 User Manual

4.3.3 Installing the LAN Driver

Perform the following procedures for all the [Ethernet controller] under [Other devices] in [Device
Manager].
■ For Windows Server 2003 x64
●
For Onboard LAN
1
Insert the PRIMERGY Startup Disc.
2
The following EXE is executed.
\DRIVERS\LAN\Broadcom\Onboard\DrvInst\x64\setup.exe
3
Click [Next].
Drivers installation starts.
4
Click [Finish].
5
Eject the PRIMERGY Startup Disc and restart the Server Blade.
●
For Eth. Ctrl 2x1Gbit PCI-E 1000-BASE-T lp (PG-2861L)
1
Insert the PRIMERGY Startup Disc.
2
Click [Start] – [Administrative Tools] – [Computer Management].
3
Click [Device manager].
4
Double-click [Ethernet controller] under [Other devices].
The properties window for the Ethernet controller appears.
5
Click [Driver] tab and click [Updating drivers].
"Welcome to Hardware updating wizard" appears.
6
Select "Install from the list or specified location" and click [Next].
7
Select "Not searching, and select installation driver" and click [Next].
8
Click "Use disk".
9
Specify the following file name to "Copies file from manufacturer's file" and click
[OK].
\DRIVERS\LAN\Intel\Pro1000\Winx64
10
Click [Next].
Drivers installation starts.
PRIMERGY BX620 S4 Server Blade User's Guide
5
6
7
8
9
79