Chapter 1 Overview
i Hard disk status LED
Indicates the state of the internal hard disk unit installed where the LED is located. The following
shows the meanings of each LED.
• Hard disk access LED (Upper)
This LED lights green when data is being written to or read from the hard disk.
• Hard disk status LED (Lower)
This LED lights or blinks depending on the hard disk status described below.
Off
Lights red
Flashes red
Flickers red
j 2.5-inch storage bay
Install the hard disk unit. Up to two hard disk units can be installed in this Server Blade.
k Release latch
This latch is used when installing / removing a Server Blade.
26
table: Hard disk status LED
LED status
Normal mode
Error detected in the hard disk
Displaying the running hard disk using SAS BIOS Utility
Rebuilding
Description