Fujitsu Primergy BX620 S4 User Manual page 33

■ USB floppy disk drive and USB CD/DVD drive
To use the PRIMERGY Startup Disc, connect the USB floppy disk drive and USB CD/DVD drive to the
Server Blade to be installed. Use the USB Cable to connect them before turning the power on the Server
Blade.
It is strongly recommended that only products listed on the PRIMERGY website (http://
primergy.fujitsu.com) are connected to the server.
The USB device connection state must not be changed during running of the Server Blade, unless
specified in procedures.
■ Cautions for installing a memory module
The available memory size of the server depends on the OS. Furthermore, since the server uses part of
the memory as PCI resources, the maximum available size is limited.
The following shows the maximum installable size and the maximum available size.
Windows Server 2003, Standard Edition
Windows Server 2003 R2, Standard Edition
Windows Server 2003, Enterprise Edition
Windows Server 2003, Standard x64 Edition
Windows Server 2003, Enterprise x64 Edition
Windows Server 2003 R2, Enterprise Edition
Windows Server 2003 R2, Standard x64
Edition
Windows Server 2003 R2, Enterprise x64
Edition
*1: When installing 4GB or more of memory in a server, the /PAE option in the "Boot.ini" file must be specified
(except Windows Server 2003 x64, Windows Server 2003 R2 x64).
*2: When installing 8GB or more of memory in a server, apply the hotfix module (KB907892) provided from
Microsoft. The hotfix module is also stored in the ServerStart CD/DVD.
table: Maximum Installable Size and Maximum Available Size
OS Installed memory size
PRIMERGY BX620 S4 Server Blade User's Guide
Available memory size
Up to 4GB
Same as the installed memory size
*2
Up to 32GB
*1
33