Chapter 4 Manual Os Installation; Creating Driver Disks; Required Driver Disks - Fujitsu Primergy BX620 S4 User Manual

Chapter 4 Manual OS Installation

4.1 Creating Driver Disks

When installing the OS manually, it is necessary to create driver installation disks
beforehand. Also, driver disks must be created when you add an expansion card
during server operation.

4.1.1 Required Driver Disks

You need floppy disks for driver disks. A floppy disk is necessary for each driver.
Required driver disks vary with the OS.
Standard driver provided with the OS is installed automatically at the OS installation.
You need a PRIMERGY Startup Disc to install the driver provided with the PRIMERGY Startup Disc.
Prepare for it in advance.
■ For Windows Server 2003 x64
Expansion board / onboard controller
Chipset
Onboard VGA
Onboard LAN controller
Onboard array controller
Eth. Ctrl 2x1Gbit PCI-E 1000-BASE-T lp (PG-2861L)
1 Gbit/s Ethernet I/O Module (PG-LND201)
2Gbit/s FC I/O Module
4Gbit/s FC I/O Module
SCSI Ctrl U160 lp (PG-1301L)
*1: Create using the ServerStart FloppyBuilder function.
64
table: Drivers Required for Installing Windows Server 2003 x64
Driver
Driver provided with the PRIMERGY Startup Disc
Driver provided with the PRIMERGY Startup Disc
Driver provided with the PRIMERGY Startup Disc
PRIMERGY BX620 S4 Onboard SAS/RAID
Driver for Windows Server 2003 x64
*1
V1.25.05.00
Driver provided with the PRIMERGY Startup Disc
Fiber Channel I/O module Driver (2Gbps) for
Windows Server 2003 x64 v9.1.2.16
Fiber Channel I/O module Driver (4Gbps) for
Windows Server 2003 x64 v1.30a9
OS standard
*1
*1