Position Of The Needle In The Needle Hole - Pfaff 5483 Instruction Manual

11

Position of the needle in the needle hole

.05.02
Requirement
1. The needle 6 must be centered in the needle hole in a crosswise direction.
2. The distance between needle 6 and the front edge of the needle plate must be approx. . . . .
0.8 mm. (In the case of machines with -911/... the needle 6 6 6 6 6 must be centered in the
needle hole in the sewing direction.)
Fig. 11 - 03
Loosen screws 1, 2, 3 and 4.
Shift needle bar frame 5 according to the requirements.
Tighten screw 3 securely and slightly tighten screw 2.
Using screw 1, pull the guide stud behind it against the eye of the needle bar frame 5
and tighten it.
Loosen screw 2 and turn the balance wheel a few times (this helps to avoid the
occurence of any tension).
Tighten screw 2.
Tighten screw 4, making sure that the slotted guide 6 is parallel to the needle bar.
2
3
6
3
4
1
4
Adjustment
1
5
4
11 - 4