Adjustment; Notes On Adjusting; Tools, Gauges And Other Accessories; Abbreviations - Pfaff 5483 Instruction Manual

Adjustment

11 Adjustment
11

Notes on adjusting

.01
All adjustments in these adjustment instructions are based on a completely installed
machine and must only be carried out by appropriately trained specialists. Covers on the
machine, which have to be removed and replaced for checks and adjustment work, are not
mentioned here.
The screws and nuts in brackets ( ) are attachments of machine parts which are to be
loosened before making the adjustment and tightened again after the adjustment has been
carried out.
11

Tools, gauges and other accessories

.02
11

Abbreviations

.03
TDC = top dead center
BDC = bottom dead center
11 - 1
The adjustments in this chapter are explained with the use of illustrations of the
PFAFF 5483-814/01 or PFAFF 5483 H-814/01.
1 set of screwdrivers with blade widths from 2 to 10 mm
1 set of open-ended spanners/wrenches,7 to 14 mm across flats
1 set of allen keys from 1.5 to 6 mm
1 metal rule Order No. 08-880 218-00
1 adjustment pin, ∅ 5 mm (Order No. 13-030 341-05)
1 clamp, Order No. 61-111 600-35/001
1 gauge, Order No. 61-111 642-19
1 gauge for the looper, Order No. 61-111 643-06
Needles
Sewing thread and test material