Adjustment
13
Needle position to needle hole
.04.03
O Set the stitch length to "0" and move the needle bar to t.d.c.
O Loosen the screws 1, 2 and 3.
O Move the needle directly over the needle hole by turning the handwheel.
O Move the needle bar frame 4 according to the rule.
O Tighten the screws 1, 2 and 3.
8
Rule
The needle should pierce the middle of the needle hole exactly (with stitch length regulation
"0").
2
Fig. 13 - 03
1
4
3