Spreader Height (Only For Machines With -911 - Pfaff 5483 Instruction Manual

Adjustment
11 Spreader height
.05.24
11 - 27
(only for machines with -911/..)
Requirement
When the tip of spreader 1 is above the looper, there must be a clearance of 0.3 mm
between the back of the looper and the underside of the spreader 1.
2
Fig. 11 - 25
Turn the balance wheel until the tip of the spreader 1 is above the looper.
Remove the holder 2 (screw 3) and adjust the height of the spreader according to the
requirement by inserting an appropriate spacer.
S p c a r e
0 3 . m m
0 6 . m m
3
1
O d r r e N . o
9 - 1 7 1 0 5 1 3 0 - 5
9 - 1 7 1 2 3 5 7 0 - 5