Position Of Thread Catcher To Needle - Pfaff 5483 Instruction Manual

Adjustment
11

Position of thread catcher to needle

.06.03
11 - 39
Requirement
When the thread-trimming device is in a neutral position, there must be a clearance of
7 mm between the point of the thread catcher 4 and the needle center.
Fig. 11 - 37
Bring the thread-trimming device into its neutral position.
Turn linkage rod 1 (nut 2, nut 3 with left-handed thread) according to the requirement.
4
7 mm
1
2
3