Setting Up; Inserting The Needle On Single-Needle Machines - Pfaff 5483 Instruction Manual

9

Setting up

9

Inserting the needle on single-needle machines

.01
Fig. 9 - 01
All instructions and regulations in this instruction manual must be observed.
Special attention must be given to all safety regulations!
All setting-up work must only be done by personnel with the necessary
training. For all setting-up work the machine must be isolated from its power
supply by turning off the main switch or removing the machine plug from the
electric power socket!
2
The choice of needle depends on the machine model and on the thread and
material used (see Chapter 3, Specifications).
Switch off the machine!
Danger of injury by
unintentional starting of the
machine!
1
Set the needle bar at its highest point.
Loosen screw 1.
Push needle 2 fully into the needle bar
(the long needle groove must face to the
front).
Tighten screw 1.
Setting up
9 - 1