Inserting The Needles On Two-Needle Machines - Pfaff 5483 Instruction Manual

Setting up
9

Inserting the needles on two-needle machines

.02
9 - 2
1
Fig. 9 - 02
The choice of needle depends on the machine model and on the thread and
material used (see Chapter 3, Specifications).
Set the needle bar at its highest point
and loosen screws 1.
Push needles 2 fully into the needle bar
2
(the long needle grooves must face to
the front).
Tighten screws 1.
Switch off the machine!
Danger of injury by
unintentional starting of the
machine!