Table of Contents
Advertisement
3) Press the Print (
number for the program will blink on the right side of the display.
4) Select the desired parameter using the right copy quantity (
right of the display.
Function
Set code
Name
0 (Cancel)
1 (30 sec)
Auto clear
*2 (60 sec)
time
3 (90 sec)
4 (120 sec)
5 (10 sec)
*: Factory setting
5)
Press the print (
stored.
Note: To change the setting or to set another mode, press the Clear ( > ) key. The copier will return to step 2).
6)
Press the light ( { ) or dark (
9-2
) key. The entered program number will be steadily lit and the currently selected parameter
Function
Set code
Name
*0 (30 sec)
1 (60 sec)
Preheat
2 (90 sec)
) key. The right-hand number in the display will be steadily lit and the entered value will be
) key to return to the normal copy mode.
) key. The entered parameter will blink on the
Function
Name
0 (2 min)
*1 (5 min)
Auto shut
2 (15 min)
off timer
3 (30 min)
4 (60 min)
Service Manual
Set code
Funtion
Name
Auto shut
off
5 (120 min)
Set code
0 (Cancel)
*1 (Setting)
Y101700-5
Advertisement
Table of Contents
