Olivetti d-Copia 12 Service Manual page 61

Main code Sub code
26 04
06
07
Y101700-5
Machine duplex setup
(Operation/Procedure)
1. When this simulation is executed, the currently set duplex code number is displayed.
2. Enter the code number corresponding to the duplex and press the ENTER key and the
setup will be changed.
Code number
0
1
Destination setup
(Operation/Procedure)
1. When this emulation is executed, the currently set destination code number is
displayed.
2. Enter the code number corresponding to the destination and press the START key,
and the setting will be changed.
Code number
0
1
2
Machine conditions check
(Operation/Procedure)
When this simulation is executed, the current machine setting is displayed.
CPM
10 cpm
12 cpm
15 cpm
The machine type is shown with the lamp display.
• No setup: None
• BTA-A: AE mode lamp ON
• BTA-B: TEXT mode lamp ON
• BTA-C: Photo mode lamp ON
Service Manual
Content
Duplex
Without duplex
With duplex
Destination
Inch series
EX AB series
Japan AB series
Copy quantity display
10
12
15
6-7