Olivetti d-Copia 12 Service Manual page 40

(13) Remove two screws and remove the fusing connector.
(14) Remove five screws and the connector, and lift the
intermediate frame unit to remove.
(15) Remove the screw and the E-ring, and remove the PS
semi-circular earth plate and the PS roller unit.
(16) Remove the E-ring and remove the spring clutch from
the PS roller unit.
4-12
(17) Remove three screws and remove the TC front paper
guide.
(18) Remove the screw and the connector, and remove the
PPD1 sensor PWB.
Service Manual Y101700-5