Table of Contents
Advertisement
Main code
Sub code
Content
64
1
Self print only with the engine (1 by 2 mode)
(Outline)
Used to print in the 1 by 2 mode by ignoring the state of the optical system.
(Operation/Procedure)
1. When this simulation is executed, warming up is made and the ready lamp is lighted.
2. Select with the cassette select key and press the start key. Paper is fed from the
cassette and printing is performed.
In the 1 by 2 mode, one line is printed and two lines are not printed.
Y101700-5
Service Manual
6-15
Advertisement
Table of Contents
