Operational Descriptions; Outline Of Operation - Olivetti d-Copia 12 Service Manual

3. OPERATIONAL DESCRIPTIONS

3.1 Outline of operation

The outline of operation is described referring to the basic configuration.
Outline of copy operation
Setting conditions
1) Set copy conditions such as the copy quantity and the copy density with the operation section, and press the COPY button.
The information on copy conditions is sent to the MCU.
Image scanning
2) When the COPY button is pressed, the scanner section starts scanning of images.
The light from the copy lamp is reflected by the document and passed through the lens to the CCD.
Photo signal/Electric signal conversion
3) The image is converted into electrical signals by the CCD circuit and passed to the MCU.
Image process
4) The document image signal sent from the CCD circuit is processed under the revised conditions and sent to the LSU (laser
unit) as print data.
Electric signal/Photo signal (laser beam) conversion
5) The LSU emits laser beams according to the print data.
(Electrical signals are converted into photo signals.)
6) The laser beams are radiated through the polygon mirror and various lenses to the OPC drum.
Printing
7) Electrostatic latent images are formed on the OPC drum according to the laser beams, and the latent images are developed
to be visible images (toner images).
8) Meanwhile the paper is fed to the image transfer section in synchronization with the image lead edge.
9) After the transfer of toner images onto the paper, the toner images are fused to the paper by the fusing section. The copied
paper is discharged onto the exit tray.
Y101700-5 Service Manual 3-1