Table 36 Wireless: Wpa/Wpa2 - ZyXEL Communications P-660HWP-D1 User Manual

The following table describes the wireless LAN security labels in this screen.

Table 36 Wireless: WPA/WPA2

LABEL
WPA Compatible
ReAuthentication
Timer (In Seconds)
Idle Timeout (In
Seconds)
Group Key Update
Timer (In Seconds)
Authentication Server
IP Address
Port Number
Shared Secret
Accounting Server (optional)
IP Address
Port Number
Shared Secret
Apply
Cancel
Advanced Setup
P-660HWP-D1 User's Guide
DESCRIPTION
This check box is available only when you select WPA2-PSK or WPA2 in the
Security Mode field.
Select the check box to have both WPA2 and WPA wireless clients be able to
communicate with the P-660HWP-D1 even when the P-660HWP-D1 is using
WPA2-PSK or WPA2.
Specify how often wireless clients have to resend usernames and passwords in
order to stay connected. Enter a time interval between 10 and 9999 seconds.
The default time interval is 1800 seconds (30 minutes).
Note: If wireless client authentication is done using a
RADIUS server, the reauthentication timer on the
RADIUS server has priority.
The P-660HWP-D1 automatically disconnects a wireless client from the wired
network after a period of inactivity. The wireless client needs to enter the
username and password again before access to the wired network is allowed.
The default time interval is 3600 seconds (or 1 hour).
The Group Key Update Timer is the rate at which the AP (if using WPA-PSK/
WPA2-PSK key management) or RADIUS server (if using WPA(2) key
management) sends a new group key out to all clients. The re-keying process is
the WPA(2) equivalent of automatically changing the WEP key for an AP and all
stations in a WLAN on a periodic basis. Setting of the Group Key Update Timer
is also supported in WPA-PSK/WPA2-PSK mode. The default is 1800 seconds
(30 minutes).
Enter the IP address of the external authentication server in dotted decimal
notation.
Enter the port number of the external authentication server. The default port
number is 1812.
You need not change this value unless your network administrator instructs you
to do so with additional information.
Enter a password (up to 31 alphanumeric characters) as the key to be shared
between the external authentication server and the P-660HWP-D1.
The key must be the same on the external authentication server and your P-
660HWP-D1. The key is not sent over the network.
Enter the IP address of the external accounting server in dotted decimal notation.
Enter the port number of the external accounting server. The default port number
is 1813.
You need not change this value unless your network administrator instructs you
to do so with additional information.
Enter a password (up to 31 alphanumeric characters) as the key to be shared
between the external accounting server and the P-660HWP-D1.
The key must be the same on the external accounting server and your P-
660HWP-D1. The key is not sent over the network.
Click Apply to save your changes to the P-660HWP-D1.
Click Cancel to reload the previous configuration for this screen.
Click Advanced Setup to display the Wireless Advanced Setup screen and
edit more details of your WLAN setup.
Chapter 7 Wireless LAN
113