Troubleshooting; Chapter 23 Troubleshooting; Power, Hardware Connections, And Leds - ZyXEL Communications P-660HWP-D1 User Manual

C
H A P T E R
This chapter offers some suggestions to solve problems you might encounter. The potential
problems are divided into the following categories.
•

Power, Hardware Connections, and LEDs

• P-660HWP-D1 Access and Login
• Internet Access
• Powerline Issues
23.1 Power, Hardware Connections, and LEDs
The P-660HWP-D1 does not turn on. None of the LEDs turn on.
1 Make sure the P-660HWP-D1 is turned on.
2 Make sure you are using the power adaptor or cord included with the P-660HWP-D1.
3 Make sure the power adaptor or cord is connected to the P-660HWP-D1 and plugged in
to an appropriate power source. Make sure the power source is turned on.
4 Turn the P-660HWP-D1 off and on.
5 If the problem continues, contact the vendor.
One of the LEDs does not behave as expected.
1 Make sure you understand the normal behavior of the LED. See
2 Check the hardware connections. See the Quick Start Guide.
3 Inspect your cables for damage. Contact the vendor to replace any damaged cables.
4 Turn the P-660HWP-D1 off and on.
5 If the problem continues, contact the vendor.
P-660HWP-D1 User's Guide

Troubleshooting

23
Section 1.4 on page 35.
289