The following table describes the fields in this screen.
Table 26 LAN IP
LABEL
LAN TCP/IP
IP Address
IP Subnet Mask
Apply
Cancel
Advanced Setup
6.3.1 Configuring Advanced LAN Setup
To edit your P-660HWP-D1's advanced LAN settings, click the Advanced Setup button in
the LAN IP screen. The screen appears as shown.
Figure 50 Advanced LAN Setup
The following table describes the labels in this screen.
Table 27 Advanced LAN Setup
LABEL
RIP & Multicast
Setup
RIP Direction
RIP Version
Multicast
Any IP Setup
P-660HWP-D1 User's Guide
DESCRIPTION
Enter the IP address of your P-660HWP-D1 in dotted decimal notation, for
example, 192.168.1.1 (factory default).
Type the subnet mask assigned to you by your ISP (if given).
Click Apply to save your changes to the P-660HWP-D1.
Click Cancel to begin configuring this screen afresh.
Click this button to display the Advanced LAN Setup screen and edit more
details of your LAN setup.
DESCRIPTION
Select the RIP direction from None, Both, In Only and Out Only.
Select the RIP version from RIP-1, RIP-2B and RIP-2M.
IGMP (Internet Group Multicast Protocol) is a network-layer protocol used to
establish membership in a multicast group. The P-660HWP-D1 supports both
IGMP version 1 (IGMP-v1) and IGMP-v2. Select None to disable it.
Chapter 6 LAN Setup
97