Powerline Network Status; Figure 76 Network > Powerline > Remote Setting; Table 45 Network > Powerline > Remote Setting - ZyXEL Communications P-660HWP-D1 User Manual

Chapter 8 Powerline
Figure 76 Network > Powerline > Remote Setting
The following table describes the labels in this screen.
Table 45 Network > Powerline > Remote Setting
LABEL
Network Remote
Stations Setting
Remote Stations In
The Same Network
Network Name
Login Remote DAK
Password
Apply
Cancel

8.5 Powerline Network Status

Use this screen to check the status of your powerline network and for expert troubleshooting.
Click on Network > Powerline > Status to access advanced information on the status of your
powerline network.
132
DESCRIPTION
This section describes the configuration of the other HomePlug AV
adapters on your power line network.
This field shows the MAC addresses of the HomePlug AV adapters
on your network. These adapters all share the Network Name
entered in the Local Settings section. Select one of the MAC
addresses listed to begin the configuration of an adapter and your
powerline network.
Type a new network name for the adapter you have selected.
Ensure the password is different from the default HomePlugAV
password.
Type the DAK Password for the device you have selected. The
DAK Password is listed on the device itself.
Click Apply to set the new Network Name. The MAC address of the
device will disappear from the list until all devices have had their
Network Name changed.
Click this button to cancel any changes you have made.
P-660HWP-D1 User's Guide