No Security; Figure 56 Wireless Lan: General; Table 32 Wireless Lan: General - ZyXEL Communications P-660HWP-D1 User Manual

Chapter 7 Wireless LAN

Figure 56 Wireless LAN: General

The following table describes the general wireless LAN labels in this screen.

Table 32 Wireless LAN: General

LABEL
Wireless Setup
Active Wireless
LAN
Network Name
(SSID)
Hide SSID
Channel
Selection
Apply
Cancel
Advanced
Setup
See the rest of this chapter for information on the other labels in this screen.

7.4.1 No Security

Select No Security to allow wireless clients to communicate with the access points without
any data encryption.
108
DESCRIPTION
Click the check box to activate wireless LAN.
(Service Set IDentity) The SSID identifies the Service Set with which a wireless client
is associated. Wireless clients associating to the access point (AP) must have the
same SSID. Enter a descriptive name (up to 32 printable 7-bit English keyboard
characters) for the wireless LAN.
Note: If you are configuring the P-660HWP-D1 from a computer
connected to the wireless LAN and you change the P-
660HWP-D1's SSID or WEP settings, you will lose your
wireless connection when you press Apply to confirm.
You must then change the wireless settings of your
computer to match the P-660HWP-D1's new settings.
Select this check box to hide the SSID in the outgoing beacon frame so a station
cannot obtain the SSID through scanning using a site survey tool.
Set the operating frequency/channel depending on your particular region.
Select a channel from the drop-down list box.
Click Apply to save your changes to the P-660HWP-D1.
Click Cancel to reload the previous configuration for this screen.
Click Advanced Setup to display the Wireless Advanced Setup screen and edit
more details of your WLAN setup.
P-660HWP-D1 User's Guide