Figure 160 Firmware Upload In Progress; Figure 161 Network Temporarily Disconnected - ZyXEL Communications P-660HWP-D1 User Manual

Chapter 21 Tools
Table 130 Firmware Upgrade (continued)
LABEL
Browse...
Upload
Do NOT turn off the P-660HWP-D1 while firmware upload is in progress!
After you see the Firmware Upload in Progress screen, wait two minutes before logging into
the P-660HWP-D1 again.

Figure 160 Firmware Upload In Progress

The P-660HWP-D1 automatically restarts in this time causing a temporary network
disconnect. In some operating systems, you may see the following icon on your desktop.

Figure 161 Network Temporarily Disconnected

After two minutes, log in again and check your new firmware version in the Status screen.
If the upload was not successful, the following screen will appear. Click Return to go back to
the Firmware screen.
282
DESCRIPTION
Click Browse... to find the .bin file you want to upload. Remember that you must
decompress compressed (.zip) files before you can upload them.
Click Upload to begin the upload process. This process may take up to two
minutes.
P-660HWP-D1 User's Guide