Chapter 7 Wireless LAN
Table 35 Wireless: WPA-PSK/WPA2-PSK
LABEL
Group Key
Update Timer (In
Seconds)
Apply
Cancel
Advanced Setup
7.4.4 WPA/WPA2
In order to configure and enable WPA/WPA2; click the Wireless LAN link under Network to
display the General screen. Select WPA or WPA2 from the Security Mode list.
Figure 66 Wireless: WPA/WPA2
44
DESCRIPTION
The Group Key Update Timer is the rate at which the AP (if using WPA-PSK/
WPA2-PSK key management) or RADIUS server (if using WPA(2) key
management) sends a new group key out to all clients. The re-keying process is
the WPA(2) equivalent of automatically changing the WEP key for an AP and all
stations in a WLAN on a periodic basis. Setting of the Group Key Update Timer
is also supported in WPA-PSK/WPA2-PSK mode. The default is 1800 seconds
(30 minutes).
Click Apply to save your changes to the P-660HWP-Dx.
Click Cancel to reload the previous configuration for this screen.
Click Advanced Setup to display the Wireless Advanced Setup screen and edit
more details of your WLAN setup.
P-660HWP-Dx User's Guide