Customized Services; Configuring A Customized Service; Figure 94 Firewall: Customized Services; Table 62 Customized Services - ZyXEL Communications P-660HWP-D1 User Manual

Chapter 11 Firewall Configuration
Table 61 Firewall: Edit Rule (continued)
LABEL
Apply
Cancel

11.6.2 Customized Services

Configure customized services and port numbers not predefined by the P-660HWP-D1. For a
comprehensive list of port numbers and services, visit the IANA (Internet Assigned Number
Authority) website. For further information on these services, please read
175. Click the Edit Customized Services link while editing a firewall rule to configure a
custom service port. This displays the following screen.
Refer to Section 10.1 on page 149

Figure 94 Firewall: Customized Services

The following table describes the labels in this screen.

Table 62 Customized Services

LABEL
No.
Name
Protocol
Port
Back

11.6.3 Configuring a Customized Service

Click a rule number in the Firewall Customized Services screen to create a new custom port
or edit an existing one. This action displays the following screen.
170
DESCRIPTION
Click Apply to save your customized settings and exit this screen.
Click Cancel to exit this screen without saving.
for more information.
DESCRIPTION
This is the number of your customized port. Click a rule's number of a service to go to a
screen where you can configure or edit a customized service. See
page 170 for more information.
This is the name of your customized service.
This shows the IP protocol (TCP, UDP or TCP/UDP) that defines your customized
service.
This is the port number or range that defines your customized service.
Click Back to return the Firewall Edit Rule screen.
Section 11.8 on page
Section 11.6.3 on
P-660HWP-D1 User's Guide