Changing Login Password - ZyXEL Communications P-660HWP-D1 User Manual

Table 7 Status: Packet Statistics (continued)
LABEL
Upstream Speed
Downstream Speed
Node-Link
Status
TxPkts
RxPkts
Errors
Tx B/s
Rx B/s
Up Time
LAN Port Statistics
Interface
Status
TxPkts
RxPkts
Collisions
Poll Interval(s)
Set Interval
Stop

2.4.8 Changing Login Password

It is highly recommended that you periodically change the password for accessing the P-
660HWP-D1. If you didn't change the default one after you logged in or you want to change to
a new password again, then click Maintenance > System to display the screen shown next.
See Table 107 on page 258
P-660HWP-D1 User's Guide
DESCRIPTION
This is the upstream speed of your P-660HWP-D1.
This is the downstream speed of your P-660HWP-D1.
This field displays the remote node index number and link type. Link types are
PPPoA, ENET, RFC 1483 and PPPoE.
This field displays Down (line is down), Up (line is up or connected) if you're
using Ethernet encapsulation and Down (line is down), Up (line is up or
connected), Idle (line (ppp) idle), Dial (starting to trigger a call) and Drop
(dropping a call) if you're using PPPoE encapsulation.
This field displays the number of packets transmitted on this port.
This field displays the number of packets received on this port.
This field displays the number of error packets on this port.
This field displays the number of bytes transmitted in the last second.
This field displays the number of bytes received in the last second.
This field displays the elapsed time this port has been up.
This field displays the type of port.
This field displays Down (line is down), Up (line is up or connected) if you're
using Ethernet encapsulation and Down (line is down), Up (line is up or
connected), Idle (line (ppp) idle), Dial (starting to trigger a call) and Drop
(dropping a call) if you're using PPPoE encapsulation.
This field displays the number of packets transmitted on this port.
This field displays the number of packets received on this port.
This is the number of collisions on this port.
Type the time interval for the browser to refresh system statistics.
Click this button to apply the new poll interval you entered in the Poll Interval
field above.
Click this button to halt the refreshing of the system statistics.
for detailed field descriptions.
Chapter 2 Introducing the Web Configurator
53