Figure 52 Wireless: Wpa/Wpa2; Table 31 Wireless: Wpa/Wpa2 - ZyXEL Communications P-660HW-T V2 - VERSION 3.40 User Manual

P-660HW-T v2 User's Guide

Figure 52 Wireless: WPA/WPA2

The following table describes the wireless LAN security labels in this screen.

Table 31 Wireless: WPA/WPA2

LABEL
WPA Compatible
ReAuthentication
Timer (In Seconds)
Idle Timeout (In
Seconds)
102
DESCRIPTION
This check box is available only when you select WPA2-PSK or WPA2 in the
Security Mode field.
Select the check box to have both WPA2 and WPA wireless clients be able to
communicate with the ZyXEL Device even when the ZyXEL Device is using
WPA2-PSK or WPA2.
Specify how often wireless clients have to resend usernames and passwords in
order to stay connected. Enter a time interval between 10 and 9999 seconds. The
default time interval is 1800 seconds (30 minutes).
Note: If wireless client authentication is done using a RADIUS
server, the reauthentication timer on the RADIUS server
has priority.
The ZyXEL Device automatically disconnects a wireless client from the wired
network after a period of inactivity. The wireless client needs to enter the
username and password again before access to the wired network is allowed.
The default time interval is 3600 seconds (or 1 hour).
Chapter 6 Wireless LAN