ZyXEL Communications P-660HW-D Quick Start Manual

802.11g wireless adsl 2+ 4-port gateway

Hide thumbs Also See for P-660HW-D:

Download this manual See also: User Manual

P-660HW-D

802.11g Wireless ADSL 2+ 4-port Gateway

Quick Start Guide

Version 3.40

3/2006

Edition 1

Table of Contents

Page 1: Quick Start Guide
P-660HW-D 802.11g Wireless ADSL 2+ 4-port Gateway Quick Start Guide Version 3.40 3/2006 Edition 1...
Page 2: Hardware Connections
If you prefer to see a multi-media animation of how to make hardware connections, see the installation tutorial on the included CD. 1 DSL: Use a telephone wire to connect your P-660HW-D’s DSL port to a telephone jack (or to a splitter, if one is already installed).
Page 3: Status Page
4 Push in the POWER button. Look at the lights on the front panel. • The POWER light and the DSL light blink while your P-660HW-D starts up and stay on once the DSL connec- tion is ready. The INTERNET light is on when you are able to access the Internet and blinks when the P- 660HW-D is sending or receiving data.
Page 4 If the web page opens correctly, your P-660HW-D is ready for you to use. If the web page does not open, follow the rest of the steps. You should have the information provided by your ISP.
Page 5 5 Click Go to Wizard setup. Then, click Apply. 6 Click INTERNET/WIRELESS SETUP. Wait while your P-660HW-D tries to detect your DSL connection. 7 Follow the directions in the wizard. Do not change default settings if your ISP did not provide information.
Page 6: Troubleshooting
Enable OTIST only if your wireless clients support WPA and OTIST. You must enable OTIST on the P-660HW-D and all wireless clients within three minutes in any order. To enable OTIST on the P-660HW-D, you can either use the wizard (see...