Removal and Replacement
Accessing a Rack-Installed Server
The following are cold-swappable components:
•
Front bezel
•
DVD drive
•
Memory carrier assembly
•
Memory DIMMs
•
Processor board assembly
•
Dual-core processors
•
I/O board assembly
•
System battery
•
I/O voltage regulator module
•
Trusted Platform Module
•
PCI/PCI-X card divider
•
Core I/O board
•
Core I/O board battery
•
SAS core I/O card
•
LAN core I/O card
•
Doorbell board
•
Display board
•
SAS backplane board
•
Interconnect board
•
Midplane board
Accessing a Rack-Installed Server
The following procedure explains how to gain access to the HP Integrity rx6600 that is installed in an
approved rack. For rack installation instructions, review the document titled Installation Guide, Mid-Weight
Slide Kit, 5065-7291. You can access this document at:
http://h18004.www1.hp.com/products/servers/proliantstorage/bcs-rackandpower/information_li
brary.html
WARNING
Ensure that all antitip features are employed (front and rear antitip feet installed;
adequate ballast properly placed, and so on) are employed prior to extending the
server from the rack.
56
Chapter 4