Core I/O Card Utilities
Smart Array P600 Controller
EBSU Utility
The EFI-based Setup Utility (EBSU) provides an easy-to-use interface for flashing firmware, partitioning the
hard disk, installing diagnostic tools, configuring storage controllers, and running other EFI utilities.
You can use EBSU to update firmware for many different devices in the system. Smart Array
NOTE
P600 is shown as an example.
To update the Smart Array P600 firmware:
Step 1. Power on the server. The server boots to EFI. The EFI Boot Manager may be used from the
enhanced interface (grey background) or the legacy interface (black background).
Step 2. Load the HP Smart Setup media into the server DVD drive.
Step 3. From the EFI Boot Menu, select
the
Welcome
Figure D-6 EBSU Welcome Screen
Step 4. Select
and press
OK
276
Internal Bootable DVD
screen.
to continue.
Enter
and press
. EBSU starts and displays
Enter
Appendix D