The following figure shows the memory carrier assembly with the side cover open.
Figure 4-15
Memory Carrier Assembly with Side Cover Open
Retaining Slots
Release Tabs
Memory Installation Conventions
Before installing memory, read and understand the following memory installation conventions:
•
Supported DIMM sizes and memory configurations
•
DIMM load order
•
DIMM slot IDs
Supported DIMM Sizes and Memory Configurations
The standard server configuration includes a 48-DIMM memory carrier which contains one or two 24-DIMM
memory boards.
System DIMMs seat onto the memory boards. The minimum server configuration requires at least one
memory quad, or group of four DIMMs.
The following are the supported DIMM sizes for the server:
•
512 MB
•
1 GB
•
2 GB
Chapter 4
Removing and Replacing System Memory
Release Tabs
Removal and Replacement
24-DIMM Memory
Board
Retaining Slots
93