Paths; Table E-3 Server Sockets; Table E-4 Server Drives - HP Integrity rx6600 User's & Service Manual

Utilities
Using the Boot Option Maintenance Menu
• "Set Auto Boot TimeOut" on page 327
• "Select Active Console Output Devices" on page 328
• "Select Active Console Input Devices" on page 329
• "Select Active Standard Error Devices" on page 330
• "Security/Password Menu" on page 330
• "Resetting Passwords" on page 330
These options are described in the following sections.
The following selections are available on all menus:
• Help: Displays the help available for the command.
• Exit: Returns to the main Boot Options Maintenance menu.
• Enter: Selects an item after using the arrow keys to highlight the item.
• Save Settings to NVRAM: Saves your changes.
NOTE The options shown here are examples. Your system may have different options available based
on the system configuration and installed hardware components.

Paths

All devices in the server are represented by paths in the EFI Shell. To identify the correct socket or disk drive,
use the following tables.
Table E-3 Server Sockets
Socket
1 PCI Acpi(HWP0002,400)/pci(0|0)
2 PCI Acpi(HWP0003,400)/pci(0|0)
Table E-4 Server Drives
Drive
SCSI Disk
SCSI Disk
Removable Media Boot
Boot From a File
Use this option to manually run a specific application or driver.
This option boots the selected application or driver one time only. When you exit the
NOTE
application, you return to this menu.
324
Acpi(HWP0002,100)/Pci(1|0)/Scsi(Pun0,Lun0)
Acpi(HWP0002,100)/Pci(1|1)/Scsi(Pun0,Lun1)
Acpi(HWP0002,0)/Pci(2|0)/ATA(Primary,Master)
Path
Path
Appendix E