Skoda Superb Owner's Manual page 70

Note
The middle rear head restraint is adjustable in two positions.
Memory function of electrically adjustable seat

First read and observe the introductory information and safety warn-
ings on page 65.
The memory function for the driver's seat provides the option to store the posi-
tions of the driver's seat and the external mirrors. Each of the three memory but-
tons » Fig. 56 can be assigned a set position.
B
Storing seat and exterior mirror settings for driving forward
›
Switch on the ignition.
›
Adjust the seat to the desired position.
›
Adjust both of the exterior mirrors
›
Press the button » Fig. 56.
A
SET
›
Within 10 seconds after pressing the
button .
B
An acknowledgment sound confirms the storage.
Saving front passenger mirror settings when reversing
›
Switch on the ignition.
›
Press the required memory button
›
Move the rotary knob for the exterior mirror control into position 
›
Engage reverse gear.
›
Adjust the front passenger's mirror to the desired position
›
Disengage reverse gear.
The set position of the exterior mirror is stored.
68
Using the system
Fig. 56
Memory buttons and SET button
» page 64.
button, press the desired memory
SET
» Fig. 56.
B
» page
» page 64.
Retrieving the saved setting
›
Press the desired memory button

or
›
Press and hold the desired memory button
ignition is on and travelling at a speed of more than 5 km / h.
Stopping the ongoing adjustment
›
Press any button on the driver's seat or the button
key.
Note
Each time new seat and exterior mirror settings for forward travel are saved, the
individual setting for the right exterior mirror for reverse travel must also be
saved again.
Memory function of the remote control key

First read and observe the introductory information and safety warn-
ings on page 65.
The function of automatically storing the positions of the driver's seat and the
external mirrors when the vehicle is locked can be activated in the memory of
the remote control key.
When this function is activated, the current positions of the driver's seat and the
external mirrors are saved in the memory of the remote control key each time the
vehicle is locked. When the vehicle is next unlocked using the same key, the driv-
er's seat and the external mirrors assume the positions stored in the memory of
this key.
Activating the function
›
Unlock the vehicle with the remote control key.
›
Press and hold any memory button
assumed the position stored under this button, at the same time press the but-
ton on the remote control key within 10 seconds.

64.
The successful activation of the function is confirmed by an audible signal.
The seat and external mirror positions which are already saved in the memory
button are not saved in the memory of the key.
The seat can be adjusted to the required position if necessary
» Fig. 56 briefly with the ignition on.
B
with the ignition off or when the
B
on the remote control

» Fig. 56 on page 68. After the seat has
B
» page 66.

