Skoda Superb Owner's Manual page 233

Front towing eye
Fig. 190 Front bumper: Removing the cap/installing the towing eye

First read and observe the introductory information and safety warn-
ings on page 230.
›
Remove the cap from the front bumper
›
Screw in the towing eye by turning to the left up to the stop
tighten as much as possible. For tightening purposes, we recommend, for exam-
ple, using the wheel wrench, towing eye from another vehicle or a similar object
that can be pushed through the eye.
›
After unscrewing the towing eye, put the cap on and press into place. The cap
must engage firmly.
CAUTION
The towing eye must always be screwed in fully and firmly tightened, otherwise
the towing eye can tear when towing in or tow-starting.
» Fig. 190 - .
» Fig. 190 -  and
Rear towing eye
Fig. 191 Rear bumper: Removing the cap/installing the towing eye

First read and observe the introductory information and safety warn-
ings on page 230.
›
Press onto the bottom part of the cap in the rear bumper
move it.
›
Screw in the towing eye by turning to the left up to the stop
tighten as much as possible. For tightening purposes, we recommend, for exam-
ple, using the wheel wrench, towing eye from another vehicle or a similar object
that can be pushed through the eye.
›
After unscrewing the towing eye, put the cap on and press into place. The cap
must engage firmly.
On vehicles with a factory-fitted towing device, there is no mount for the screw-
in towing eye behind the cap » page

CAUTION
The towing eye must always be screwed in fully and firmly tightened, otherwise
the towing eye can tear when towing in or tow-starting.
Vehicles with a towing device

First read and observe the introductory information and safety warn-
ings on page 230.
On vehicles with a factory-fitted towing device, there is no mount for the screw-
in towing eye behind the cap.
» Fig. 191 -  and re-
» Fig. 191
231, Vehicles with a towing device.
Emergency equipment and self-help
-  and


231