Skoda Superb Owner's Manual page 123

If the system expects a voice command, you can end the dialogue yourself:
›
with the CANCEL voice command;
›
by briefly pressing the button
1
Note
The dialogue of an incoming call is immediately interrupted.
■
The voice control is only possible in vehicles fitted with a multifunction steering
■
wheel with telephone control or a phone mount and adapter.
On vehicles that are factory-fitted with the Columbus navigation system, it is
■
only possible to operate the voice control for the telephone via this device
erating instructions for the Columbus navigation system, chapter Voice control
for the navigation system.
Voice commands - GSM II

First read and observe the introductory information given on page 120.
Basic voice commands
Voice command
After this command, the system repeats all possible
HELP
commands.
This command calls up the contact from the phone
CALL XYZ
book.
After this command, for example, the phone book
PHONE BOOK can be repeated back to you, a voice entry for the
contact can be updated or deleted, etc.
CALL HISTORY Lists of dialled numbers, missed calls, etc.
After this command, a telephone number can be en-
DIAL NUMBER tered in order to establish a connection with the re-
quested party.
After this command the system calls the last dialled
REDIAL
number.
Play music from the mobile phone or another paired
MUSIC a)
device.
After this command the system offers additional
FURTHER OPTIONS
context-dependent commands.
» Fig. 116 on the multifunction steering wheel.
Action
Voice command
SETTINGS
CANCEL
a)
On vehicles fitted with the Amundsen+ navigation system, this function can be accessed via the navi-
gation system menu; refer to the operating instructions for the Amundsen+ navigation system.
If a voice command is not detected, the system answers with "Sorry?", and a new
entry can be made. After the 2nd error the system repeats the aid. After the
3rd Failure is the answer " Operation aborted. " and ends the dialogue.
» Op-
Storing voice recording for a contact
If automatic name recognition does not work reliably for some contacts, you can

choose to save your own voice tag for the contact in the Phone book - Voice tag -
Record menu item.
Your own voice tag can also be saved using the voice control in the Further op-
tions menu.
Voice commands - GSM III

First read and observe the introductory information given on page 120.
Basic voice commands
Voice command
HELP
CALL NAME
DIAL NUMBER
REDIAL
READ ADDRESSBOOK
READ MESSAGES
SHORT DIALOGUE
Action
®
Selection for setting Bluetooth , dialogue etc.
The dialogue is ended.
Action
After this command, the system repeats all possible
commands.
After this command, a name can be entered to es-
tablish a connection with the requested party.
After this command, a telephone number can be en-
tered in order to establish a connection with the re-
quested party.
The last selected telephone number is selected.
The system reads out contacts from the telephone
book.
The system reads the messages which were re-
ceived while the telephone was connected to the
control unit.
The help is significantly reduced (good operating
knowledge provided).
Communication and multimedia


121