Skoda Superb Owner's Manual page 154

Finding a parking space
Fig. 138 System button/displays in the instrument cluster display

First read and observe the introductory information and safety warn-
ings on page 151.
The search for a suitable parking space takes place while the display is switched
off. If the display is not switched on using the  symbol button until the driver
drives past the parking space, the system can assess and display this parking
space.
Finding a parallel parking space
›
Drive past the parking space at up to 40 km/h and a distance of 0.5 – 1.5 m.
›
Press the  » Fig. 138 symbol button once.
The following is shown in the information display of the information clus-
ter » Fig. 138 - .
Finding a perpendicular parking space
›
Drive past the parking space at up to 20 km/h and a distance of 0.5 – 1.5 m.
›
Press the  » Fig. 138 symbol button twice.
The following is shown in the information display of the information clus-
ter » Fig. 138 - .
The search area for the parking space on the front passenger's side is automati-
cally shown in the instrument cluster display.
Activate the turn signal on the driver's side if you wish to park on this side of the
road. The search area for the parking space on the driver's side is shown in the
instrument cluster display.
152
Driving
If suitable parking space is found, its parameters are stored until another suitable
parking space has been found or until a distance of 10 m had been driven after
finding the parking space.
To change the parking mode when searching for a parking space, press the 
symbol button again.
Parking
Fig. 139 Displays in the instrument cluster display

First read and observe the introductory information and safety warn-
ings on page 151.
The time limit for the parking procedure with the help of the system is 6 minutes.
If the system has recognised a suitable parking space, this parking space is
shown in the display » Fig. 139 - .
›
Continue driving forwards until the display appears
›
Stop and make sure that the vehicle does not move forward until the start of
the parking procedure.
›
Select reverse gear or move the selector lever into position R.
›
As soon as the following message is shown in the information cluster display: 
Steering interv. active. Monitor area around veh.!, let go of the steering wheel.
The steering will be taken over by the system.
›
Observe the direct vicinity of the vehicle and reverse carefully.
In the event that the parking procedure cannot be carried out in one go, the park-
ing process is completed in further stages.
›
If the forwards arrow is flashing in the display
first gear or move the selector lever into position D.

» Fig. 139 - .
» Fig. 139 - , then select
