Replacing the bulb for the fog light
Fig. 208 Front bumper: Remove the protective grille/fog light
First read and observe the introductory information and safety warn-
ings
on page 241.
Removing the protective grille
›
Release the protective grille in the area of the arrow
clamp for removing the wheel trims
›
Remove the protective grille in the direction of the arrow
Changing light bulbs for fog lights
›
Use the screwdriver from the tool kit to unscrew the fog lamp
›
Remove the headlight in the direction of arrow
›
Remove the connector.
›
Turn bulb holder
» Fig. 209
in an anti-clockwise direction up to the stop and
A
remove.
›
Insert the bulb holder with the new bulb into the headlight and turn in a clock-
wise direction as far as the stop.
Fig. 209
Replacing the light bulb
» Fig. 208
- using the
» page
222, Car tool.
.
1
» Fig. 208
.
2
›
Fit the connector.
›
Replace the fog lamp by inserting it in the opposite direction of the arrow
» Fig. 208
- and tighten.
2
›
Insert the protective grille and carefully press it in.
The protective grille must engage firmly.
Replacing the bulb for the licence plate light
Fig. 210 Remove the number plate light/replace the bulb
First read and observe the introductory information and safety warn-
ings
on page 241.
Change
›
Open the boot lid.
›
Insert a slotted screwdriver at the location indicated by the arrow
press it in lightly, and unlatch the springs.
›
Remove the lamp.
›
Pull the faulty bulb out of the holder in the direction of the arrow
›
Insert a new bulb into the holder.
›
Replace the lamp and lightly press it until the spring latches.
- .
» Fig. 210
- ,
» Fig. 210
- .
243
Fuses and light bulbs