Skoda Superb Owner's Manual page 26

Average fuel consumption
The average fuel consumption since the memory was last erased is shown in the
display in litres/100 km » page 24, Memory.
1)
To determine the average fuel consumption over a certain period of time, set the
memory at the start of the new measurement to zero using button B
Memory . After erasing the memory, no value appears in the display until you have
driven approx. 300 m.
The display is updated regularly while you are driving.
Range
The estimated range in kilometres is shown on the display. It indicates the dis-
tance you can still drive with your vehicle based on the level of fuel in the tank
and the same style of driving.
The display is shown in steps of 10 km. After lighting up of the indicator light
the display is shown in steps of 5 km.
The fuel consumption over the last 50 km is used to calculate the range. The
range will increase if you drive in a more economical manner.
If the memory is set to zero (after disconnecting the battery), the fuel consump-
tion of 10 ltr./100 km is calculated for the range; afterwards the value is adapted
accordingly to the style of driving.
Distance travelled
The distance driven since the memory was last erased, appears in the dis-
play » page 24, Memory. If you want to measure the distance travelled from a
particular moment in time on, at this moment, reset the memory by setting the
button to zero » page 24, Memory.
The maximum distance indicated in both memories is 1 999 km or 9 999 km on
vehicles with an information display. The indicator is set back to zero if this period
is exceeded.
Average speed
The average speed since the memory was last erased is shown in the display in
km/hour » page 24, Memory. To determine the average speed over a certain pe-
riod of time, set the memory to zero at the start of the measurement
Memory.
After erasing the memory, no value appears in the display until you have driven
approx. 300 m.
1)
On some models in certain countries, the display appears in kilometres/litre.
24
Using the system
The display is updated regularly while you are driving.
Current speed
The current speed which is identical to the display of the speedometer
on page 8 is indicated on the display.
» page 24,
Oil temperature
If the oil temperature is lower than 50 °C or if a fault in the system for checking
the oil temperature is present, only - -.- is displayed instead of the oil tempera-
ture.
Warning against excessive speeds
The warning that the speed limit is being exceeded can be enabled / disa-
bled » page 25, Warning against excessive speeds in the display.

Memory

First read and observe the introductory information and safety warn-
ings on page 22.
The multifunction display is equipped with two automatic memories. The selected
memory is shown in the Display
Select memory
›
Select one of the elements of the multi-function display
» page 24,
mation.
›
Press the button
Fig. 11
Multifunction display: Preset
» Fig. 11.
» Fig. 10 on page 23 or the adjustment wheel
B
» Fig. 2
2

» page 23, Select Infor-
briefly.
D
