Skoda Superb Owner's Manual page 119

If the Wi-Fi network is switched on, the display will show the following message,
for example: WLAN SK_WLAN 1234 switched on.
The display then shows a password for the Wi-Fi network connection. The pass-
word can subsequently be found in the Mobile phone - Wi-Fi - Password - Show
menu.
If no data connection via Wi-Fi is available, the display will show the message Da-
ta connection not available. This can be caused by a weak GSM signal, for exam-
ple. Try to establish the connection again at a location with stronger signal recep-
tion.
Switching off
›
Select the Wi-Fi - Off menu item in the Mobile phone menu.
The display shows the message Switch off Wi-Fi?
›
Select the OK menu item.
The display shows the message Wi-Fi switch off.
Connecting an external device to the Wi-Fi network

First read and observe the introductory information given on page 116.
Connecting using the Wi-Fi network search
›
Switch on the Wi-Fi network » page
›
On the device to be connected, search for available Wi-Fi networks (Wi-Fi) - see
operating instructions for the device to be connected.
›
Select the appropriate Wi-Fi network connection in the menu of the networks
found (e.g. Wi-Fi SK_WLAN 1234).
If menu item WPA2 is set in the Mobile phone - Wi-Fi - Settings - Encryption
menu, then the password displayed when the Wi-Fi is switched on must be en-
tered in the device to be connected. The password can be found in the Mobile
phone - Wi-Fi - Password - Show menu.
If menu item Open is set in the Mobile phone - Wi-Fi - Settings - Encryption
menu, the connection is made automatically.
Connecting using WPS (service for easy connection)
›
Switch on the Wi-Fi network » page
›
Open the Mobile phone - Wi-Fi - WPS config. menu in the instrument cluster.
›
In the device to be connected, select the connection using WPS function - see
operating instructions for the device to be connected.
116, Switching Wi-Fi network on/off.
116, Switching Wi-Fi network on/off.
If the Pushbutton menu item is selected in the instrument cluster, the Wi-Fi con-
nection is made automatically.
If the WPS PIN menu item is selected in the instrument cluster, then a PIN must
be entered in the device to be connected and the instrument cluster.
Operating a Wi-Fi network in the information display

First read and observe the introductory information given on page 116.
When a Wi-Fi network is switched on, the following menu items are displayed
when the Wi-Fi menu item is selected.
Off - Switch off the Wi-Fi network (depending on the context)
■
■ Device List - Display a list of external devices
Active device - Display a list of active devices
■
Block - Block device connections
 ■
■ Known devices - Display a list of known devices
Rename - Rename the device
■
Block - Block device connections
■
■ Device blocked - Display a list of blocked devices
Unblock - Remove the connection block
■
Delete lists - Delete device lists
■
■ Known devices - Delete the list of known devices
Device blocked - Delete the list of blocked devices
■
Both lists - Delete both device lists
■
■ Password - Use of password to log on to the Wi-Fi network
Show - Display a password to log on to the Wi-Fi network
■
Generate - Generate a new password to log on to the Wi-Fi network
■
Wi-Fi name - Use of Wi-Fi network name
■
Show - Display the Wi-Fi network name
■
Rename - Rename the Wi-Fi network
■
WPS config. - Wi-Fi network connection using WPS
■
■ Pushbutton - Automatic connection
WPS PIN - PIN entry for the connection
■
Data counter - Display information about the volume of data transferred
■
■ Current conn. - Display the volume of data transferred for the current connec-
tion
Total - Display the total volume of data transferred
■
■ Reset - Reset the information about the volume of data transferred
Communication and multimedia


117